Printronix P5000LJ Manual De Referência
Switching Between the Emulations
111
Reserved Codes
The Download Characters control code (ASCII code ESC =, hex code 1B 3D)
is a reserved code. It is not implemented at this time. When implemented, this
code is usually followed by large blocks of data. The Proprinter III XL
emulation will currently ignore this control code and any data applicable to it.
is a reserved code. It is not implemented at this time. When implemented, this
code is usually followed by large blocks of data. The Proprinter III XL
emulation will currently ignore this control code and any data applicable to it.
Switching Between the Emulations
The printer supports several different emulations. PCL-II is the default. P-
Series, Proprinter III XL, and Epson FX-1050 are all a part of the LinePrinter
Plus emulation.
Series, Proprinter III XL, and Epson FX-1050 are all a part of the LinePrinter
Plus emulation.
The following command switches from PCL-II to Proprinter:
ESC%-00001X
To switch from Proprinter to PCL-II, send the following command to the
printer:
printer:
ESC|};KD