Equator ed620 Manual Do Utilizador

 

 
 

 

 

 

1.  Make sure Dryer is turned off. (Indicator light should be off). 

2.  Separate clothes into cottons, permanent press. 

3.  Load clothes of the selected type loosely into the drum. Do not load clothes more than 

3/5

th

 full. 

4.  Close the Dryer door.  You will hear a click when it is correctly closed. 

5.  Turn the Dryer knob to the desired amount of minutes for drying.  High Heat for Cottons 

and Less Heat for Perma Press clothing.  

6.  Review these steps and check all the settings on the control panel before starting the 

machine.  

7.  Press the Power button.  The indicator light will come on and in a few seconds, you will 

hear the cycle begin.  

8.  When the Dryer has completed the cycle, the machine will stop automatically, although 

the indicator light will remain on until you manually press out the Power button. 

 
Note:  
You can open the door any time during the Dry cycle without waiting. Be aware if heat builds 
up. 

 

Starting your dryer in the right way is important for the quality of your dry, to help prevent 
future problems and enhance life expectancy of your appliance. Once you have loaded your 
dryer, always check that: 
 

1) The door is closed correctly. 
2) The plug is secured in the socket. 

  
Choose the desired program 
The program is selected according to the type of garments that need to be dried. To choose 
a dryer time, refer to the table on page 13, then:   

 
1)  Turn Dryer knob to the desired position. 
2)  If necessary, use ½ heat button. 
3)  Press the Power button. 

 
At the end of the dry cycle... 
Turn the dryer off by pressing Power button. You can now open the dryer door safely. After 
having removed the dried laundry, leave the door open to allow air circulation inside the 
drum. Remember that, in the event of a power failure, or should the dryer switch itself off, the 
program chosen will remain in memory. 

 

 
 
 
 

13 

Tumble Dryer Owner’s Manual