Toshiba DMF102XKU Guia Do Utilizador

19

♦ When the AC adaptor is in use, its 

temperature may increase. However, 

it is not a malfunction. Make sure that 

the AC adaptor is disconnected and the 

temperature decreases before carrying 

it.
NOTE
♦ Do not use the supplied AC adaptor 

with any device other than this Digital 

Media Frame.
♦ It takes some time when you turn on 

the device by pressing the 

POWER 

button (on the side of the Digital Media 

Frame) for the fi rst time.

Press the 

POWER button (on the 

side of the Digital Media Frame) or the 

ON/STANDBY button (on the remote 

control) to turn on the device. The 

power indicator will turn to green.

Press the button again to switch to 

the Standby mode. The power indicator 

will turn to red. 

Press and hold the 

POWER button 

(on the side of the Digital Media 

Frame) for several seconds. The power 

indicator goes out.

You can still use the 

ON/STANDBY 

button during the power-off mode. 

Insert the memory cards in direction 

indicated (as illustrated) and slowly 

push the cards to lock into place. 

SD

xD

MS DUO

MS

Remove the memory cards slowly 

from corresponding slots in direction 

indicated (as illustrated).   

SD

xD

MS DUO

MS

NOTE
♦ For details about the memory cards 

supported, please refer to the section 

Specifi cations. (Refer to page 55)