Toshiba M100 Guia Do Utilizador
60
Getting Started
Installing additional memory (optional)
5.375 x 8.375 ver 2.3
2
Unplug the computer and remove any cables you may
have connected.
have connected.
Installing a memory module with the computer’s power on may
damage the computer, the module, or both.
damage the computer, the module, or both.
3
Open the display panel and remove the panel that
contains the Power and TOSHIBA Console buttons.
contains the Power and TOSHIBA Console buttons.
When removing the computer’s power and TOSHIBA Console
button panel to install additional memory, be careful not to
damage the display or circuit board.
button panel to install additional memory, be careful not to
damage the display or circuit board.
Using a flat head screw driver to pry the panel off
You can pry the panel out of its position by using a flat
head screwdriver. Starting at the left or right side,
carefully wedge the flat head screwdriver between the
panel and the surrounding housing. Grasp the end of the
panel, lift up and wiggle it back and forth until the panel
comes free.
head screwdriver. Starting at the left or right side,
carefully wedge the flat head screwdriver between the
panel and the surrounding housing. Grasp the end of the
panel, lift up and wiggle it back and forth until the panel
comes free.