Toshiba 1405-S151 Guia Do Utilizador
239
If Something Goes Wrong
Resolving a hardware conflict
5.375 x 8.375 ver 2.4.0
7
Look at Device 0. The current transfer mode should be
Ultra DMA Mode 2. If it isn’t, select Ultra DMA Mode 2
from the pull-down menu and click OK.
Ultra DMA Mode 2. If it isn’t, select Ultra DMA Mode 2
from the pull-down menu and click OK.
WinDVD problems: content issues
Movies exhibit poor performance of “Director's
Commentary” or other similar optional content
versions.
Commentary” or other similar optional content
versions.
Some movies may exhibit poor performance of these
features. In particular, the video portion of the movie may
become jerky or show pauses. The normal version of the
movie will not show this problem.
features. In particular, the video portion of the movie may
become jerky or show pauses. The normal version of the
movie will not show this problem.
WinDVD will not function properly with “debug”
software installed.
software installed.
The WinDVD application will not function properly if it
detects that debug software is present on the system. Remove
the debug software to restore functionality of WinDVD.
detects that debug software is present on the system. Remove
the debug software to restore functionality of WinDVD.
WinDVD: error messages
This table offers descriptions and resolutions for error
messages that may appear when using WinDVD.
messages that may appear when using WinDVD.
Error message and additional
information
information
Resolution
The disc in the DVD-ROM
drive is not a valid disc
type.
drive is not a valid disc
type.
Valid disc types are
DVD-Video and audio CD.
DVD-Video and audio CD.
Ensure the disc is a valid
disc type.
disc type.
If the disc works in other
players, try using a disc
cleaner.
players, try using a disc
cleaner.
The disc may require fea-
tures that are not supported
by WinDVD.
tures that are not supported
by WinDVD.