Sony KDL-26S2000 Guia Do Utilizador

 GB

You can change/set the analogue settings using the 
Analogue Set-up menu. To select options in 
“Settings”, see “Navigating through menus” 
(page 20).

When “1 Digit Direct” is set to “On”, you can select an analogue channel using one 
preset number button (0 - 9) on the remote.

When “1 Digit Direct” is set to “On”, you cannot select channel numbers 10 and above entering 
two digits using the remote.

Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already tuned 
when the TV was first installed (page 5, 6). However, this option allows you to 
repeat the process (e.g., to retune the TV after moving house, or to search for new 
channels that have been launched by broadcasters). 

Changes the order in which the analogue channels are stored on the TV.
1

Press 

F

/

f

 to select the channel you want to move to a new position, 

then press 

.

Press 

F

/

f

 to select the new position for your channel, then press 

.

Assigns a channel name of your choice up to five letters or numbers. The name will 
be displayed briefly on the screen when the channel is selected. (Names for channels 
are usually taken automatically from Analogue Text (if available).)
1

Press 

F

/

f

 to select the channel you want to name, then press 

.

Press 

F

/

f

 to select the desired letter or number (“_” for a blank space), 

then press 

g

.

If you input a wrong character
Press 

G/g to select the wrong character. Then, press F/f to select the correct 

character.

To delete all the characters
Select “Reset”, then press 

Repeat the procedure in step 2 until the name is complete.

Select “OK”, then press 

.