Toshiba M20 Guia Do Utilizador
153
Expansion Options
Using a mouse
Using a PS/2 mouse simultaneously with AccuPoint II
When you connect a PS/2-compatible mouse to the PS/2 port, you
may use the mouse, the AccuPoint II, or both:
may use the mouse, the AccuPoint II, or both:
When connecting any PS/2 device, turn off your
computer to prevent any possible hardware damage.
computer to prevent any possible hardware damage.
If you connect a PS/2 mouse to the computer while it is
in Standby mode, you will not be able to use the mouse
when you turn the computer on.
in Standby mode, you will not be able to use the mouse
when you turn the computer on.
1
Click Start, Control Panel, then Printers and Other
Hardware.
Hardware.
2
Click the Toshiba HWSetup icon.
3
Select the Pointing Devices tab.
4
Under Pointing Devices Options, select one:
❖
Auto-selected — configures the PS/2 mouse to work
when it is connected at power on, or the AccuPoint II to
work otherwise. Auto-selected is normally the default
option.
when it is connected at power on, or the AccuPoint II to
work otherwise. Auto-selected is normally the default
option.
❖
Simultaneous — configures both the AccuPoint II mouse
and PS/2 mouse to work with the computer at the same
time. You must reboot the computer for the settings to
take effect.
and PS/2 mouse to work with the computer at the same
time. You must reboot the computer for the settings to
take effect.
HINT: When Auto-selected is the default, the computer
can not detect a PS/2 mouse if you connect it after
booting the computer.
can not detect a PS/2 mouse if you connect it after
booting the computer.
This can be changed in Toshiba Hardware Setup.
5
Click OK.