Toshiba M20 Guia Do Utilizador
60
Connecting Other External Devices
Using external display devices
Using external display devices
The selections available are:
❖
Built-in display only
❖
Built-in display and external device simultaneously
❖
External device only
❖
Built-in display and TV (or other external video device)
simultaneously (only when in dual controller mode)
simultaneously (only when in dual controller mode)
❖
TV (or other external video device) only
3
Release the
Fn
key for the selection to take effect.
TECHNICAL NOTE: You can also change these settings
using the Display Properties Box.
using the Display Properties Box.
Set the option for the video controller by clicking Start,
then Control Panel and clicking Display. Choose the
Settings tab, click the Advanced button, select Display
Device, select the applicable Monitor type, click Apply or
OK.
then Control Panel and clicking Display. Choose the
Settings tab, click the Advanced button, select Display
Device, select the applicable Monitor type, click Apply or
OK.
For more information on switching the display output, see
.
Adjusting the quality of the external display
To obtain the best picture quality from your television (or other
video display device), you may need to adjust the video settings.
See the video device documentation for additional configuration
steps.
video display device), you may need to adjust the video settings.
See the video device documentation for additional configuration
steps.
TECHNICAL NOTE: In order to use one of the
simultaneous modes, you must set the resolution of the
internal display panel to match the resolution of the
external display device. The external display device must
support a resolution of 640 X 480 or higher.
simultaneous modes, you must set the resolution of the
internal display panel to match the resolution of the
external display device. The external display device must
support a resolution of 640 X 480 or higher.