Toshiba M20 Guia Do Utilizador
80
Connecting Other External Devices
Inserting and removing PC Cards
Inserting and removing PC Cards
Inserting and removing PC Cards
Your Satellite M20 computer comes with two stacked PC Card
slots and supports three types of PC Cards:
slots and supports three types of PC Cards:
❖
Type I cards — You can install up to two of these cards, one in
each slot.
each slot.
❖
Type II cards — You can install up to two of these cards, one
in each slot.
in each slot.
❖
Type III cards — You can install just one of these cards.
Inserting a PC Card
Use caution when lifting or turning your computer.
Failure to do so may result in damage to components,
such as cables, attached to your computer, or to the
computer itself.
Failure to do so may result in damage to components,
such as cables, attached to your computer, or to the
computer itself.
Before you insert a PC Card, refer to the documentation that
comes with the card to see if you need to do anything before you
insert it.
comes with the card to see if you need to do anything before you
insert it.
To insert a PC Card:
1
Turn off the computer.
You may also hot swap a PC Card. Stop the PC Card by
clicking the Safely Remove Hardware icon on the System
Tray. After the PC Card is stopped, it is safe to remove.
clicking the Safely Remove Hardware icon on the System
Tray. After the PC Card is stopped, it is safe to remove.
2
Locate the PC Card slot on the left side of the computer.
3
If the PC Card slots are locked, unlock them by turning the
computer over, locating the PC Card lock and sliding the lock
into the unlocked position.
computer over, locating the PC Card lock and sliding the lock
into the unlocked position.