Toshiba M30 Guia Do Utilizador

Página de 209
 
Operating Basics 
Satellite M30 Series 
  4-3 
Satellite M30 Series
Version   
1
  Last Saved on 10.09.2003 13:55
ENGLISH using  Mies10 Online.dot –– Printed on 10.09.2003 as  
Disconnecting 3½" diskette drive 
When you have finished using the diskette drive, follow the procedures 
below to disconnect it: 
1.  Wait for the indicator light to go out to make sure all diskette activity 
has stopped.  
 
If you disconnect the diskette drive or turn off the power while the 
computer is accessing the drive you may lose data or damage the diskette
or the drive. 
2. Click the Safety Remove Hardware icon on the Task Bar. 
3.  Click Diskette drive. 
4.  Pull the diskette drive connector out of the USB port. 
Using optical media drives 
The illustrations in this section might differ slightly from your drive, but 
operation is the same for all optical media drives. The full-size drive 
provides high-performance execution of CD/DVD-ROM-based programs. 
You can run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without an 
adaptor. An ATAPI interface controller is used for CD/DVD-ROM 
operation. When the computer is accessing a CD/DVD, an indicator on 
the drive glows. 
 
Use the WinDVD 4 application to view DVD-Video discs. 
If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs on 
CD-RW/DVD-ROM drive
 section for precautions on writing to CDs. 
If you have a DVD-R/-RW drive, refer also to the Writing CD/DVDs on 
DVD-R/-RW drive
 section for precautions on writing to CDs. 
If you have a DVD Multi drive, refer also to the Writing CD/DVDs on DVD 
Multi drive
 section for precautions on writing to CDs.