Toshiba S2 Guia Do Utilizador
101
Learning the Basics
Using the DVD-ROM or multi-function drive
5.375 x 8.375 ver 2.3
7
Gently press the disc onto the center spindle until you
feel it click into place.
feel it click into place.
Handle DVDs and CDs carefully, making contact only with the
center hole and edge. Do not touch the surface of the disc. Do
not stack discs. If you incorrectly handle the discs, you could
lose data.
center hole and edge. Do not touch the surface of the disc. Do
not stack discs. If you incorrectly handle the discs, you could
lose data.
8
Make sure the disc is completely on the spindle and is
lying flat on the tray.
lying flat on the tray.
If you insert the disc incorrectly, it may jam the drive. If this
happens, contact Toshiba support for assistance.
happens, contact Toshiba support for assistance.
9
Push the disc tray in by pressing gently on the center of
the tray until it clicks into place.
the tray until it clicks into place.
You are ready to use the disc.
Removing a disc with the computer on
To remove a compact disc (CD or DVD) with the computer
turned on:
turned on:
1
Press the eject button on the drive.
Do not press the eject button while the in-use indicator light is
glowing. Doing so could damage the disc or the drive.
glowing. Doing so could damage the disc or the drive.
Also, if the disc is still spinning when you open the disc tray,
wait for it to stop spinning before you remove it.
wait for it to stop spinning before you remove it.
2
Pull the tray until it is fully open, remove the disc, and
place it in its protective cover.
place it in its protective cover.
3
Gently push the tray in to close it.