Toshiba S2 Guia Do Utilizador
177
Toshiba Utilities
User-level passwords
5.375 x 8.375 ver 2.3
3
Insert a write-enabled diskette into the diskette drive.
HINT: Run System Setup outside Windows, at a system
prompt. If you try to run System Setup from an MS-DOS
session under Windows, results can be unpredictable.
prompt. If you try to run System Setup from an MS-DOS
session under Windows, results can be unpredictable.
4
Hold down the
Esc
key and press and hold the power
button in until the on/off light on the system indicator
panel turns on (green)—about one second. When you
receive the following message: “Press F1 to continue,”
press
panel turns on (green)—about one second. When you
receive the following message: “Press F1 to continue,”
press
F1.
System Setup displays a setup screen.
5
Press
S
to select Startup.
6
Press
U
to select Set User Password.
The Set User Password window appears.
7
Type a password of 1 to 10 characters in the Enter New
User Password text box, then press
User Password text box, then press
Enter
.
You may use any combination of letters and numbers in your
password.
password.
8
Type the same password again in the Verify New User
Password text box, then press
Password text box, then press
Enter
.
If the two passwords do not match System Setup displays an
error message. Repeat steps 5 through 8 to enter the password
again.
error message. Repeat steps 5 through 8 to enter the password
again.
9
Click
OK
to save your change.
10
Press
X
to select Exit.
11
Press
X
to select Save and Exit.
12
Click
OK
to save and exit System Setup.