Toshiba S2 Guia Do Utilizador

194

5.375 x 8.375 ver 2.3

that came with the conflicting device and 

Your computer normally loads the operating system from the 
hard disk. If you have a hard disk problem, you will not be 
able to start the computer. Insert a system diskette into the 
external diskette drive and press 

F12

 when the machine starts, 

and then use the arrow keys to select the boot-up device.

For more information, see 

WARNING RESUME FAILURE

The computer was placed in Stand By mode and the battery 
has discharged. Data stored in the computer’s memory has 
been lost. However, data stored in the computer’s hard drive 
may not be affected.

Always save your data, even when you are using the Stand 
By. If your battery fully discharges, information that has not 
been saved will be lost. Your computer can be configured to 
warn you when the battery is running low. For more 
information, see 

.

If you are running on battery power, it is recommended that 
you do not leave the computer in Stand By mode for long 
periods of time.

To charge the battery, leave the computer plugged into a live 
wall outlet for several hours. For more information, see 

. 

Non-system disk or disk error

Make sure there is no diskette in the diskette drive. If there is 
one, remove it and press any key to continue. If pressing any 
key does not work, press 

Ctrl,

 

Alt

, and 

Del to 

restart the 

computer.