Toshiba TDP-ET10 Guia Do Utilizador

53

The indicator lights inform you of internal abnormalities.

No LED lit

No power
 

⇒  Problem with projector

• Unplug the power cord, and contact your dealer.

 

⇒  The lamp cover is not properly attached.

• Unplug the power cord, and reattach the lamp cover.

Red LED is fl ashing at ON/
STANDBY indicator (2Hz)

Power went out during use
 

⇒   Internal overheating, or the outside temperature is too high.

•  Place the projector so that the air intake and exhaust are not 

blocked.

• Unplug the power cord and wait for a short while, then turn 

the power back on.
❈ The icon will appear before the power goes out.

❈ After approx. one minute of abnormal display, the projector 

returns to the standby state waiting for internal cool down.

Red LED is fl ashing at ON/
STANDBY indicator (5Hz)

Power went out during use
 

⇒  Problem with internal cooling fan.

• Unplug the power cord, and contact your dealer.

❈ The icon will appear before the power goes out.

❈ After approx. one minute of abnormal display, the projector 

returns to the standby state waiting for internal cool down.

Red LED lit at ON/STAND-
BY indicator

⇒  Lamp temperature is high so that it is diffi cult to turn on, 

the lifetime of the lamp has ended or the projector is 
malfunctioning.

•  Unplug the power cord and wait for a short while, then turn 

the power back on.

•  If a lamp burns out, replace it with a new one.

❈ After approx. one minute of abnormal display, the projector 

returns to the standby state waiting for internal cool down.