Toshiba 19a20 Manual Do Proprietário
17
Set up
Basic Operation
Advanced Operation
Reference Selection
To temporarily unblock programs
THIS PROGRAM HAS BEEN BLOCKED!
TV–PG L V
EXCEEDS SET LIMITS
EXCEEDS SET LIMITS
PUSH MUTE TO ENTER PIN
CABLE 4
1
If you try to watch a TV program that exceeds the rating
limits you set, the TV will enter into the program block
mode.
limits you set, the TV will enter into the program block
mode.
BLOCKING IS ACTIVE
PLEASE ENTER PIN CODE
TO TEMPORARILY UN-BLOCK
~~~–
PLEASE ENTER PIN CODE
TO TEMPORARILY UN-BLOCK
~~~–
SELECT[0-9] END[EXIT]
2
If you want to watch the blocked program temporarily,
press MUTE.
press MUTE.
Press the Number buttons (0-9) to enter the 4-digit code
you have stored.
If the number is correct, the block mode will be released.
After 1 second, normal picture will appear.
you have stored.
If the number is correct, the block mode will be released.
After 1 second, normal picture will appear.
All blocking is disabled until the TV is turned off.
It will be enabled when the power is reapplied.
It will be enabled when the power is reapplied.
If a wrong pin code is entered, the message appears.
Enter the correct code again.
Enter the correct code again.
INCORRECT PIN CODE
PLEASE ENTER PIN CODE
TO TEMPORARILY UN-BLOCK
~~~~
PLEASE ENTER PIN CODE
TO TEMPORARILY UN-BLOCK
~~~~
SELECT[0-9] END[EXIT]
BLOCK CHANNEL function
With the CHANNEL BLOCK function, you can block spe-
cific channels. The TV will not be able to tune these channels
with the CHANNEL s/t buttons or Channel Number
buttons, unless you clear the setting.
This TV has 8 memory spaces total, 4 for TV mode and 4 for
CABLE mode.
cific channels. The TV will not be able to tune these channels
with the CHANNEL s/t buttons or Channel Number
buttons, unless you clear the setting.
This TV has 8 memory spaces total, 4 for TV mode and 4 for
CABLE mode.
To block channels
1
Select a channel you want to block.
BLOCK CHANNEL
SET CLEAR
15 10 6 2
SET CLEAR
15 10 6 2
SELECT[T S ] CLEAR[s t ]
END[EXIT]
END[EXIT]
S
0 0 0 0
ENABLE BLOCKING Y N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
MOVE[s t ] SELECT[T S ]
S
2
Select “BLOCK CHAN-
NEL” in the V-CHIP
CONTROL menu by
pressing t or s.
NEL” in the V-CHIP
CONTROL menu by
pressing t or s.
BLOCK CHANNEL
SET CLEAR
0 0 0 0
SET CLEAR
0 0 0 0
SELECT[T S ] SET[s t ]
END[EXIT]
END[EXIT]
S
BLOCK CHANNEL
SET CLEAR
0 0 0 2
SET CLEAR
0 0 0 2
SELECT[T S ] SET[s t ]
END[EXIT]
END[EXIT]
S
3
Press T or S to display
the BLOCK CHANNEL
menu.
the BLOCK CHANNEL
menu.
4
Press T or S to select
“SET”, then press t or
s until the channel
number to be blocked
(“2” in this example) re-
places “0” on the display.
“SET”, then press t or
s until the channel
number to be blocked
(“2” in this example) re-
places “0” on the display.
5
Repeat steps 1 to 4 for other channels.
6
Select another channel before turning off the TV.
To restore channels
1
Select “CLEAR” follow-
ing the above steps 2 to 4.
ing the above steps 2 to 4.
2
Press t or s until “0”
replaces the channel
numbers.
replaces the channel
numbers.
3
Press EXIT to erase the display.