Toshiba 32HL85 Manual Do Utilizador
10
(E)32HL85
Connecting
y
our T
V
Connecting a VCR
This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
programs, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
• two coaxial cables
• one set of standard A/V cables
• one set of standard A/V cables
IN from ANT OUT to TV
VIDEO AUDIO
L
R
IN
OUT
CH 3
CH 4
CH 4
Note:
• If you have a mono VCR, connect L/Mono
• If you have a mono VCR, connect L/Mono
to VCR Audio OUT using only one audio
cable.
cable.
• If you have a VCR with S-video, use an
S-video cable instead of a standard video
cable.
cable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
From Cable Box or Antenna
Stereo VCR
TV upper
back panel
back panel
TV lower back panel
Connecting a cable converter box and VCR
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. Set the TV signal source
to VIDEO 1 (page 44). Tune the VCR to channel 3 or 4 (the same
channel as the converter box output switch), and use the cable
converter box to change channels.
cable channels, as well as watch videotapes. Set the TV signal source
to VIDEO 1 (page 44). Tune the VCR to channel 3 or 4 (the same
channel as the converter box output switch), and use the cable
converter box to change channels.
• three coaxial cables
• one set of standard A/V cables
• one set of standard A/V cables
Stereo VCR
From cable
TV upper
back panel
back panel
IN from ANT OUT to TV
VIDEO AUDIO
L
R
IN
OUT
CH 3
CH 4
CH 4
IN
OUT
Cable converter box
TV lower back panel
Note:
• When you use a converter box with your
• When you use a converter box with your
TV, the channel selection feature does not
operate.
operate.
• When you use a converter box with your
TV, the remote control may not operate
some features, such as programming your
favorite channels, labeling channels, and
locking channels.
some features, such as programming your
favorite channels, labeling channels, and
locking channels.
• If you have a mono VCR, connect L/Mono
to VCR Audio OUT using only one audio
cable.
cable.
• If you have a VCR with S-video, use an
S-video cable instead of a standard video
cable.
cable.
• You also can connect a standard VCR to
either set of VIDEO-2 IN terminals. Do not
connect devices to both sets of VIDEO-2
IN terminals at the same time or the
picture performance will be unacceptable.
connect devices to both sets of VIDEO-2
IN terminals at the same time or the
picture performance will be unacceptable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
#01E09-15_32HL85
05.5.11, 5:44 PM
10
Black