Toshiba 40XV648U Guia Do Utilizador

52

Displaying TV status information

To display TV status information using RECALL:
Press E on the remote control.
The following information will display (if applicable):
•Current input (ANT/CABLE, Video 1, etc.)
•If ANT/CABLE is the current input, either “CABLE” 

(for cable TV) or “ANT” (for over-the-air broadcasts).

•Channel number (if in ANT/CABLE mode)
•Input label (if set)
•Digital signal strength indicator (bar graph in lower 

right corner of box; for ATSC signal only)

•Stereo, Mono or SAP audio status (when HDMI input 

mode, Dolby Digital or PCM)

•Video resolution
•Aspect ratio of incoming video signal (4:3 or 16:9)
•V-Chip rating status
•GameTimer (if set)

To close the RECALL screen:
Press E again.

To display TV status information using INFO:
(only available for ANT/CABLE input)
Press Q on the remote control.
The following additional information will display for 
off air digital channels (if applicable):
•Title
•Duration
•Detailed description

To display Next information, press  Q on the remote 
control again. Pressing Q a third time will remove the 
entire banner.

or bottom of the screen by pressing B or b while the 
RECALL or INFO display is on-screen. (The last position 
will be stored to memory.) 

Understanding the auto power off 
feature

The TV will automatically turn itself off after 
approximately 15 minutes if it is tuned to a vacant 
channel or a station that completes its broadcast for the 
day. This feature functions in ANT/CABLE mode only.

Understanding the last mode 
memory feature