Toshiba 40XV645U Guia Do Utilizador
30
Chapter 5: Setting up your TV
Setting the time zone
The Time Zone setup will allow you to specify the
correct time zone for your region. This feature will
allow the TV status information to show the correct
time zone information for your viewing area.
correct time zone for your region. This feature will
allow the TV status information to show the correct
time zone information for your viewing area.
1
From the SETUP menu, highlight TV Settings and
press T.
press T.
2
Press B or b to select Local Time Setting and press
T.
T.
3
Highlight Time Zone and press C or c to set your
desired time zone.
desired time zone.
4
If you want to activate the daylight saving time,
highlight Daylight Saving Time.
highlight Daylight Saving Time.
5
Press C or c to select On and press O.
Selecting the location
You can select Home or Store for the TV location. For
normal home use, select Home.
normal home use, select Home.
1
From the SETUP menu, highlight Location.
2
Press C or c to select Home and press O.
Selecting the TOSHIBA
Illumination mode
Illumination mode
You can set the illumination mode of the TOSHIBA logo
located on the front panel to On or Off.
located on the front panel to On or Off.
1
From the PREFERENCES menu, highlight
TOSHIBA Illumination
TOSHIBA Illumination
.
2
Press C or c to select either On or Off, then press O.
Selecting the Power-On Mode
You can select either Power-Saving or Fast mode.
•Power-Saving mode keeps power consumption in
•Power-Saving mode keeps power consumption in
standby mode to below 1W. As a result, it takes a bit
longer for the TV to turn on.
longer for the TV to turn on.
•Fast mode increases power consumption in standby
mode. As a result, the TV will turn on more quickly.
1
From the SETUP menu, highlight Power-On
Mode
Mode
.
2
Press C or c to select either Power-Saving or Fast,
then press O.
Select Power-Saving for optimal energy efficiency.
then press O.
Select Power-Saving for optimal energy efficiency.
Using Blue Screen
With the Blue Screen feature, the screen will turn blue
and the sound will be muted on analog channels and
external input modes when no signal is received.
and the sound will be muted on analog channels and
external input modes when no signal is received.
1
From the PREFERENCES menu, highlight Blue
Screen
Screen
.
2
Press C or c to select On, and press O.
Setting the screen transparency
You can set the transparency of the on-screen display
system.
system.
1
From the PREFERENCES menu, highlight
Transparency
Transparency
.
2
Press C or c to select Low, Middle, High or Off, and
press O.
press O.