Toshiba 46SV670U Guia Do Utilizador

Página de 83
5
Service
41)
Never attempt to service the TV yourself. Opening and 
removing the covers may expose you to dangerous 
voltage or other hazards. Failure to follow this WARNING 
may result in death or serious injury. Refer all servicing 
not specified in this manual to a Toshiba Authorized 
Service Center.
42) If you have the TV serviced:
• Ask the service technician to use only replacement 
parts specified by the manufacturer.
• Upon completion of service, ask the service 
technician to perform routine safety checks to 
determine that the TV is in safe operating condition.
Choosing a location for your LCD TV
To Display your LCD TV on the included Pedestal 
Stand: 
Observe the following safety precautions:
1)
Read and Follow the pedestal assembly instructions 
included with the pedestal.
CAUTION: Before beginning pedestal assembly, 
carefully lay the front of the LCD Panel face down on a 
flat, cushioned surface such as a quilt or blanket. 
Leave the bottom of the unit protruding over the edge 
of the surface and assemble the pedestal as indicated 
below.
Note: Extreme care should always be used when 
attaching the pedestal stand to avoid damage to the 
LCD panel.
2)
Place the TV on a sturdy, level surface that can support 
the weight of the TV.
3)
Be sure to secure the TV to a wall stud, pillar, surface, 
or other immovable structure. To secure the TV in this 
manner: (1) attach the provided securement clip to an 
immovable structure, then (2) pass a sturdy strap 
through the securement clip and attach each end to 
the hooks located on the back of the TV. Be sure to 
leave at least 4 inches between the TV and the wall or 
similar structure for ventilation. See item 23, page 3 for 
additional details.
To Display your LCD TV using a Wall Bracket: 
If you decide to wall mount your LCD TV, always use a UL 
listed wall bracket appropriate for the size and weight of 
the LCD TV (
1)
CAUTION: Two people are required for installation. 
2)
Unplug and remove any cables and/or other 
component connectors from the rear of the TV.
3)
Follow the instructions provided with your wall 
bracket. Before proceeding, make sure the 
appropriate bracket(s) are attached to the wall and the 
back of the TV as described in the instructions 
provided with the wall bracket.
4)
After attaching the appropriate bracket(s) to the wall 
and the back of the TV, remove the pedestal stand 
from the TV as described below.
Removing the Pedestal Stand
1)
Carefully lay the front of the unit face down on a flat, 
cushioned surface such as a quilt or blanket. Leave the 
stand protruding over the edge of the surface.
Note: Extreme care should always be used when 
removing the pedestal stand to avoid damage to the 
LCD panel.
2)
Remove the four screws shown in the diagram below. 
This will allow removal of the pedestal stand.
3)
Once you have removed all four screws holding the 
pedestal stand in place, remove the pedestal stand 
from the TV by sliding the pedestal stand away from 
the TV.
WARNING: 
RISK OF ELECTRIC SHOCK!
Four screws