Humax l3040 Manual Do Proprietário

15

1. Connect a DVI 29pin cable(not supplied) to the DIGITAL PC INPUT jack on the LCD TV and DVI 

output jack on the PC.

2. Connect audio cables(not supplied) to the AUDIO INPUT  jacks on the LCD TV and audio output 

jack on the PC.

NOTE : When you connect a DVI, Please note the Analog input is not supported.

To watch the PC screen :

1. Turn on LCD TV and press the SOURCE button to select the DVI.
2. Turn on PC and check for PC system requirements. Refer to the 

‘Operation with a PC’ section.

3. Adjust the PC screen.

Our adoption of the new VESA

®

Plug and Play solution eliminates complicated and time consuming setup. 

It allows you to install your LCD TV in a Plug and Play compatible system without the usual hassles and
confusion. Your PC system can easily identify and configure itself for use with your display. This LCD TV
automatically tells the PC system its Extended Display Identification Data(EDID) using Display Data
Channel(DDC) protocols so the PC system can automatically configure itself to use the flat panel display.

DVI-I 29pin Cable

Audio Cable