Netgear GS504 Guia Da Instalação
Model GS504 4-Port Gigabit Switch Installation Guide
Front Panel
The front panel of the Model GS504 switch contains the following LEDs that
correspond to each network port: Activity (Rx/Tx) and FDX (full-duplex)/
Collision. Each fiber network port has its own Link LED (located to the right of
each 1000 Mbps port).
correspond to each network port: Activity (Rx/Tx) and FDX (full-duplex)/
Collision. Each fiber network port has its own Link LED (located to the right of
each 1000 Mbps port).
LEDs
The table below describes the activity of the LEDs.
Label
Color
Activity
Description
Power Green
On
Off
Off
Power is supplied to the switch.
Power is disconnected.
Power is disconnected.
FDX/Col
Green
Yellow
On
Off
Off
Blinking
The port is operating in full-duplex mode.
The port is operating in half-duplex mode.
The port is operating in half-duplex mode.
Data collisions are occurring on the port. In a full-
duplex environment, there is no collision. In a half-
duplex environment, some collisions are normal.
duplex environment, there is no collision. In a half-
duplex environment, some collisions are normal.
Activity
Green
Blinking
Packet transmission or reception is occurring on
the port.
the port.
Link Green
On
Off
Off
A valid 1000 Mbps link is established on the port.
A link is not established on the port.
A link is not established on the port.
Product Illustration
Power
Green=FDX, Yellow=Col
Activity
Tx
Rx
1
2
3
4
Link
1
2
3
4
GS504SX
MODEL
Gigabit Fiber Switch
4
PORT
10/100Mbps
Ethernet
Tx
Rx
Link
Tx
Rx
Link
Tx
Rx
Link
Front Panel of the Model GS504 Switch
Power LED
Fiber network
ports
ports
Activity
LEDs
LEDs
FDX/Collision LED
9318FA
Link
LED
LED