Netgear WFS709TP Guia Do Utilizador
6-1
v1.0, June 2007
Chapter 6
Configuring AAA Servers
You can use an external authentication server or an internal user database to authenticate users who
need to access the wireless network.
need to access the wireless network.
This chapter describes how to configure theWFS709TP ProSafe Smart Wireless Switch to
interface with an external Remote Authentication Dial-In User Service (RADIUS) server, and how
to add entries into the internal database.
interface with an external Remote Authentication Dial-In User Service (RADIUS) server, and how
to add entries into the internal database.
This chapter describes the following topics:
•
•
•
Configuring an External RADIUS Server
To configure RADIUS authentication servers on the WFS709TP:
1. Collect the following required information for RADIUS server configuration (
).
Note: In order for an external authentication server to process requests from the
WFS709TP, you must configure the server to recognize the WFS709TP. Refer to
the vendor documentation for the external authentication server for information on
how to do this.
the vendor documentation for the external authentication server for information on
how to do this.
Table 6-1. RADIUS Server Configuration Information
Parameter
Description
Server Name
Name of the RADIUS authentication server
IP Address
IP address of the authentication serve
Shared Secret
Shared secret between the WFS709TP and the authentication server
Authentication Port
Authentication port on the server (default is 1812)
Accounting Port
Accounting port on the server (default is 1813)