Netgear FVS328 Manual De Referência

8-4

Managing Your Network

This screen shows the following parameters:

System Name

This field displays the Host Name assigned to the firewall in the Basic 
Settings menu.

Firmware Version

This field displays the firewall firmware version.

LAN Port

These parameters apply to the Local (WAN) port of the firewall. 

MAC Address

This field displays the Ethernet MAC address being used by the Local 
(LAN) port of the firewall.

IP Address

This field displays the IP address being used by the Local (LAN) port of 
the firewall. The default is 192.168.0.1

IP Subnet Mask

This field displays the IP Subnet Mask being used by the Local (LAN) 
port of the firewall. The default is 255.255.255.0

DHCP

If set to OFF, the firewall will not assign IP addresses to local PCs on the 
LAN.
If set to ON, the firewall is configured to assign IP addresses to local 
PCs on the LAN.

WAN Port

These parameters apply to the Internet (WAN) port of the firewall. 

MAC Address

This field displays the Ethernet MAC address being used by the Internet 
(WAN) port of the firewall.

IP Address

This field displays the IP address being used by the Internet (WAN) port 
of the firewall. If no address is shown, the firewall cannot connect to the 
Internet.

DHCP

If set to None, the firewall is configured to use a fixed IP address on the 
WAN.
If set to Client, the firewall is configured to obtain an IP address 
dynamically from the ISP

IP Subnet Mask

This field displays the IP Subnet Mask being used by the Internet (WAN) 
port of the firewall.

Domain Name Servers 

(DNS)

This field displays the DNS Server IP addresses being used by the 
firewall. These addresses are usually obtained dynamically from the ISP.