Netgear FVS328 Manual De Referência
Model FVS328 ProSafe VPN Firewall with Dial Back-up Reference Manual
NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVS328
G-3
May 2004, 202-10031-01
DynDNS service. Gateway B will use the DDNS Service Provider when establishing a VPN
tunnel.
tunnel.
In order to establish VPN connectivity Gateway A must be configured to use Dynamic DNS, and
Gateway B must be configured to use a DNS hostname to find Gateway A provided by a DDNS
Service Provider. Again, the following step-by-step procedures assume that you have already
registered with a DDNS Service Provider and have the configuration information necessary to set
up the gateways.
Gateway B must be configured to use a DNS hostname to find Gateway A provided by a DDNS
Service Provider. Again, the following step-by-step procedures assume that you have already
registered with a DDNS Service Provider and have the configuration information necessary to set
up the gateways.
Step-By-Step Configuration of FVS318 or FVM318 Gateway A
1.
Log in to the FVS318 or FVM318 labeled Gateway A as in the illustration.
Out of the box, the FVS318 or FVM318 is set for its default LAN address of
http://
192.168.0.1
with its default user name of
admin
and default password of
password
. For this
example we will assume you have set the local LAN address as 10.5.6.1 for Gateway A and
have set your own password.
have set your own password.
2.
Click the Dynamic DNS link on the left side of the Settings management GUI.
3.
Access the Web site of one of the dynamic DNS service providers whose names appear in the
‘Use a dynamic DNS service’ list, and register for an account.
‘Use a dynamic DNS service’ list, and register for an account.
For example, for dyndns.org, click the link or go to www.dyndns.org.
Figure G-2: Dynamic DNS Setup menu