Netgear FVS328 Manual De Referência

Serial Port Configuration

4-3

— If your modem is not on the list, select “User Defined” and enter the Modem Properties.

If you are using the “User Defined” selection and configuring your own modem stings, fill 
in the Modem Properties settings.

Note:  You can validate modem string settings by first connecting the modem directly to a 
PC, establishing a connection to your ISP, and then copying the modem string settings 
from the PC configuration and pasting them into the FR328S Modem Properties Initial 
String field. For more information on this procedure, please refer to the support area of the 
NETGEAR web site.

3.

Click Apply to save your settings.

You can configure the serial port of the FVS328 to provide an auto-rollover backup connection for 
your broadband service.

Be sure you have prepared the basic requirements listed below, then follow the ‘how to’ procedure.

Auto-Rollover requires these elements:

1.

A broadband connection to the FVS328.

2.

An ISDN or analog phone line with an active ISDN or dial-up ISP account

3.

A serial modem properly configured and attached to the DB9 connector on the serial port. 

4.

The Auto-Rollover settings configured and applied to the FVS328. 

Follow the steps below to configure a serial port auto-rollover connection.

1.

Configure a serial port modem according to the instructions above.

2.

From the main menu, click Auto-rollover in the Serial Port section.