Netgear FVS336G Guia De Referência
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Router and Network Management
8-11
v1.0, October 2007
.
2. Click the Yes radio box to enable HTTPS remote management (enabled by default).
3. Click Apply to have your changes take effect.
When accessing your VPN firewall from the Internet, the Secure Sockets Layer (SSL) will be
enabled. You will enter https:// (not http://) and type your firewall’s WAN IP address into your
browser. For example, if your WAN IP address is 172.16.0.123, type the following in your
browser:
enabled. You will enter https:// (not http://) and type your firewall’s WAN IP address into your
browser. For example, if your WAN IP address is 172.16.0.123, type the following in your
browser:
https://172.16.0.123
The VPN firewall’s remote login URL is https://<IP_address> or
https://<FullyQualifiedDomainName>..
https://<FullyQualifiedDomainName>..
Figure 8-3
Note: For enhanced security, restrict access to as few external IP addresses as
practical. See
for instructions on
restricting administrator access. Be sure to use strong passwords.
Note: To maintain security, the FVS336G will reject a login that uses http://address
rather than the SSL https://address.
Note: The first time you remotely connect to the FVS336G with a browser via SSL, you
may get a warning message regarding the SSL certificate. If you are using a
Windows computer with Internet Explorer 5.5 or higher, simply click Yes to accept
the certificate.
Windows computer with Internet Explorer 5.5 or higher, simply click Yes to accept
the certificate.