Netgear FVS336G Guia De Referência

C-2

Network Planning for Dual WAN Ports

–

For rollover mode, protocol binding does not apply.

–

For load balancing mode, decide which protocols should be bound to a specific WAN 
port (you will make these selections in 

). 

–

You can also add your own service protocols to the list (see 

 for information on how to do this).

3. Set up your accounts

a.

Obtain active Internet services such as cable or DSL broadband accounts and locate the 
Internet Service Provider (ISP) configuration information.

•

In this document, the WAN side of the network is presumed to be provisioned as 
shown in 

, with two ISPs connected to the VPN firewall through separate 

physical facilities. 

•

Each WAN port must be configured separately whether you are using a separate ISP 
for each WAN port or are having the traffic of both WAN ports routed through the 
same ISP. You will need your ISP information for 

•

If your ISP charges by the volume of data traffic each month, consider enabling a 
traffic meter to monitor or limit your traffic (see 

 if you want to do this).

b. Contact a Dynamic DNS Service and register fully qualified domain names for one or both 

WAN ports. You will need fully qualified domain names for 

.

3. Plan your network management approach