Netgear FVS336G Guia De Referência
ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN FVS336G Reference Manual
Connecting the FVS336G to the Internet
2-9
v1.0, October 2007
Manually Configuring the Internet Connection
Unless your ISP automatically assigns your configuration automatically via DHCP, you will need
to obtain configuration parameters from your ISP in order to manually establish an Internet
connection. The necessary parameters for various connection types are listed in
to obtain configuration parameters from your ISP in order to manually establish an Internet
connection. The necessary parameters for various connection types are listed in
To manually configure your WAN1 ISP Settings:
1. Select Network > WAN Settings > WAN1 ISP Settings and enter the following:
2. In the ISP Login options, choose one of these options:
•
If your ISP requires an initial login to establish an Internet connection, click Yes (this is
the default).
the default).
•
If a login is not required, click No and ignore the Login and Password fields.
3. If you clicked Yes, enter the ISP-provided Login and Password information.
4. In the ISP Type options, select the type of ISP connection you use from the three listed
options. (By default, “Other (PPPoE)” is selected, as shown below.
(If your connection is PPPoE, PPTP or BigPond Cable, your ISP will require an initial login.)
5. If you have installed login software such as WinPoET or Enternet, then your connection type
is PPPoE. If your ISP uses PPPoE as a login protocol:
Figure 2-6
Figure 2-7