Adtran 550 Guia Do Utilizador
ATLAS 550 System Manual
Section 4 User Interface Guide
61200305L2-1B
© 2004 ADTRAN, Inc.
239
D
EDICATED
M
APS
(D
UAL
N
X
56/64 M
ODULE
)
D
EDICATED
M
APS
(V35N
X
) > C
REATE
/E
DIT
M
APS
> C
ONNECTS
Write security: 3; Read security: 5
Enters the dedicated map connections. Press <Enter> to activate the submenus.
P
ORTS
A
VAILABLE
Write security: 3; Read security: 5
Indicates which ports of the module are assigned. Port assignment is based on the following items:
D
IGIT
0-9 This DS0 is available. The digit that displays in this field represents the last digit of
the DS0 number.
*
This DS0 has been requested for this connection, but the DS0 is not yet activated
for this port.
for this port.
!
This DS0 is used by this port in this connection and is currently activated.
S
This DS0 is used in the switched D
IAL
P
LAN
.
S
This DS0 is used in the switched D
IAL
P
LAN
and conflicts with this connection.
N
This DS0 is already used in this D
EDICATED
M
AP
.
N
This DS0 is already used in this D
EDICATED
M
AP
and conflicts with this connection.
S
IGNALING
M
ETHOD
Write security: 3; Read security: 5
Defines the mode of operation of the selected voice port. The signaling on the T1 mapped to this
voice port must match. The options include
voice port must match. The options include
L
OOPSTART
, G
ROUNDSTART
,
and
DPT
.
A
NSWER
S
UPERVISION
Write security: 3; Read security: 5
Configures answer supervision for the appropriate voice port. Answer supervision (when the far end
answers the call) is indicated by using reverse battery polarity. This is valid for an outbound call
only. When the FXO originates a call, it looks for reverse polarity on the 2W interface. If reverse
battery is detected, LSAS is transmitted on the T1. This requires Loopstart interfaces to be polarity
dependent.
answers the call) is indicated by using reverse battery polarity. This is valid for an outbound call
only. When the FXO originates a call, it looks for reverse polarity on the 2W interface. If reverse
battery is detected, LSAS is transmitted on the T1. This requires Loopstart interfaces to be polarity
dependent.
Keep this option disabled unless you are certain you need LSAS capability.