Adtran 550 Guia Do Utilizador
61200305L2-1B
© 2004 ADTRAN, Inc.
323
DLP-6 Updating the Firmware Using TFTP
Introduction
The ATLAS 550 supports firmware updates using TFTP or XMODEM. (Use the 10/100BaseT Ethernet
port and TFTP from a network server, or use XMODEM and the
port and TFTP from a network server, or use XMODEM and the
ADMIN
or
CRAFT
interfaces.) This DLP
provides the steps for a successful firmware upgrade using the 10/100 BaseT Ethernet port and a TFTP
server. (See DLP-7, Updating the Firmware Using XMODEM, for instructions on using XMODEM.)
server. (See DLP-7, Updating the Firmware Using XMODEM, for instructions on using XMODEM.)
Tools and Materials Required
•
A PC with Telnet client software
•
A TFTP server accessible on the local network (A TFTP server is provided with the unit as part of the
ADTRAN Utilities software.)
ADTRAN Utilities software.)
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
lightning storm.
Electronic equipment can be damaged by static electrical discharge. Before handling it,
put on an antistatic discharge wrist strap to prevent damage to electronic components.
Place equipment in antistatic packing material when transporting or storing. When
working on equipment, always place it on an approved antistatic mat that is electrically
grounded.
put on an antistatic discharge wrist strap to prevent damage to electronic components.
Place equipment in antistatic packing material when transporting or storing. When
working on equipment, always place it on an approved antistatic mat that is electrically
grounded.