Adtran 550 Guia Do Utilizador
61200305L2-1B
© 2004 ADTRAN, Inc.
335
DLP-10 Saving and Transferring a Current Configuration Using
XMODEM
Introduction
The ATLAS 550 supports configuration transfers from the unit via the
ADMIN
or
CRAFT
interfaces using a
VT100 terminal or terminal emulator (with XMODEM). This DLP provides the steps for a successful
configuration transfer using either the
configuration transfer using either the
ADMIN
or
CRAFT
port and XMODEM.
Tools and Materials Required
•
VT100 terminal or PC with VT100 terminal emulation software
•
XMODEM software
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
lightning storm.
Electronic equipment can be damaged by static electrical discharge. Before handling it,
put on an antistatic discharge wrist strap to prevent damage to electronic components.
Place equipment in antistatic packing material when transporting or storing. When
working on equipment, always place it on an approved antistatic mat that is electrically
grounded.
put on an antistatic discharge wrist strap to prevent damage to electronic components.
Place equipment in antistatic packing material when transporting or storing. When
working on equipment, always place it on an approved antistatic mat that is electrically
grounded.