Adtran 3200 Guia De Configuração Rápida

Quick Start Guide, 61202860L1-13B, July 2005

Technical Support 1-888-4ADTRAN (1-888-423-8726)

Copyright © 2005 ADTRAN, All Rights Reserved

For more detailed documentation, visit us online at 

www.adtran.com

The following steps create a password of adtran for Telnet access. By default, Telnet access is 
enabled with a password of password.

1.

Verify that the prompt of your unit displays (config)#.

2.

Enter line telnet 0 4 to change the configuration parameters for the Telnet sessions.

3.

Enter login to initiate Telnet access.

4.

Enter password adtran to change the login password for the Telnet sessions.

5.

Enter exit to return to the Global Configuration mode.

6.

Verify that the prompt of your unit displays (config)#.

7.

Enter do write memory to save the current configuration.

1

DCD

Data Carrier Detect (output)

2

RD

Receive Data (output)

3

TD

Transmit Data (input)

4

DTR

Data Terminal Ready (input)

5

SG

Signal Ground

6

DSR

Data Set Ready (output)

7

—

Unused

8

CTS

Clear to Send (output)

9

—

Unused

More detailed documentation for configuring your ADTRAN unit is provided on the ADTRAN OS 
Documentation CD included in your shipment. For more detail on hardware setup, refer to the 
appropriate NIM Quick Start Guides and the Hardware Installation Guide. For more detail on 
configuring your system, refer to the ADTRAN Operating System (AOS) Command Reference 
Guide, configuration guides, and technical support notes.

1

TX1

Transmit Positive

2

TX2

Transmit Negative

3

RX1

Receive Positive

4, 5

—

Unused

6

RX2

Receive Negative

7, 8

—

Unused