Adtran 5305 Guia De Configuração Rápida

Quick Start Guide, 61200831L1-13C, July 2005

Technical Support 1-888-4ADTRAN (1-888-423-8726)

Copyright © 2005 ADTRAN, All Rights Reserved

For more detailed documentation, visit us online at 

www.adtran.com

More detailed documentation for configuring your ADTRAN unit is provided on the 
ADTRAN OS System Documentation CD included in your shipment. For more 
details on hardware setup, refer to the appropriate NIM Quick Start Guides and the 
Hardware Installation Guide. For more detail on configuring your system, refer to 
the ADTRAN Operating System (AOS) Command Reference Guide, configuration 
guides, and technical support notes.

Before connecting to the NetVanta 5305 CONSOLE interface you will need the 
following items: VT100 terminal or PC (with VT100 terminal emulation 
software) and a straight-through serial cable with a DB-9 (male) connector on 
one end and the appropriate interface for your terminal (or PC) on the other.

1. Connect the DB-9 (male) connector of your serial cable to the CONSOLE 

port on the rear panel of the unit.

2. Connect the loose end of the serial cable to the VT100 terminal or PC (with 

terminal emulation software).

3. Open a VT100 terminal session to the NetVanta 5305 using the following 

settings: 9600 baud, 8 data bits, no parity bits, and 1 stop bit. Press 
<Enter> to activate the ADTRAN Command Line Interface (CLI).