Adtran 600R Manual Do Utilizador

Total Access 600 Series System Manual

Section 4  User Interface Guide

61200624L1-1B

© 2004 ADTRAN, Inc.

165

For more details on the configuration parameters discussed in this section, refer to the following pages:

Press <E

> on the T

 [+] option to view the T

 options if the 

port mode is set to T

 (E&M).

Set the C

 of the port to either L

 or G

.

Set the S

 of the port to either I

 or W

.

Be sure to set the T

 options for each port set to T

 E&M.

From the main menu, select DS0 M

.

Verify that the A

 is set to either M

 1 or M

 2. This is the map that 

is actively running on the unit. The unit has the ability to store two maps.

• To edit the current map, press <E

> on E

 1 to view the 

map. (If Map 1 is the Active Map)

• To edit the standby map, press <E

> on E

 2 to view the 

map. (If Map 2 is the Active Map)

Scroll down to the DS0 that will be mapped. 

Set the S

 for the DS0 that you are mapping to FXS. 

Set the P

 of the DS0 that you are mapping. The port number entered must 

match the voice port the DS0 is being mapped to. RBS (robbed bit signaling) 
will automatically turn on when a port number has been selected. 

Map all the DS0s as desired, and exit this menu by pressing the left arrow 
button. Your changes will automatically save when exiting the map.

Make sure the A

 is set to the correct map (the map you want 

running) before exiting the DS0 M

 menu.

Left arrow back to the main menu.