Netgear WNR2000 Instrução De Instalação

Troubleshooting

29

If you have difficulties accessing the Internet, use the Basic Setup Checklist to make sure that you 
have connected and set up your router correctly. If your basic setup is correct, then look for your 
problem in one of the subsequent sections.

The following items are the most common errors made when initially setting up a router. Carefully 
review the checklist to make sure that you have followed the recommended procedures.

•

Be sure you always start your network in this sequence: 

1. Turn off and unplug the modem from the power outlet. Next, turn off the wireless router 

and computer.

2. Turn on the modem and wait 2 minutes.

3. Turn on the wireless router and wait 1 minute.

4. Turn on the computer. 

•

Make sure the Ethernet cables are securely plugged in. 

–

The Internet status light on the wireless router will be lit if the Ethernet cable to the 
wireless router from the modem is plugged in securely and the modem and wireless router 
are both turned on (see 

–

For each powered-on computer connected to the wireless router with a securely plugged-
in Ethernet cable, the corresponding wireless router LAN port status light will be lit. The 
label on the back of the wireless router identifies the number of each LAN port (see 

). 

•

Make sure the network settings of the computer are correct. 

For more information, refer to the online User Manual. A link to this document is 
included on the Resource CD, and is also available from the router interface, after the 
router is installed. Click Documentation on the main menu.