Netopia r6100 Guia De Referência
Easy Setup 7-5
ADSL Line Configuration
1.
Select Data Link Encapsulation and press Return. The pop-up menu will offer you the choice of PPP or
RFC1483. Your selection depends on which type your ISP uses. The default is RFC1483.
RFC1483. Your selection depends on which type your ISP uses. The default is RFC1483.
Note: For non-Nor th American users it may be necessar y to specify the Vir tual Path Identifier (VPI) and the
Vir tual Channel Identifier (VCI) values to be different from the defaults. To change the VCI and VPI values, you
must use the ADSL Line Configuration screen under the WAN Configuration menu. See
Vir tual Channel Identifier (VCI) values to be different from the defaults. To change the VCI and VPI values, you
must use the ADSL Line Configuration screen under the WAN Configuration menu. See
for more information.
2.
Press the Down arrow key until you reach NEXT SCREEN. Press Return to bring up the next screen.
Easy Setup Profile
The Easy Setup Profile screen is where you configure the parameters that control the Netopia R6000 Series’s
connection to a specific remote destination, usually your ISP or a corporate site.
connection to a specific remote destination, usually your ISP or a corporate site.
On a Netopia R6000 Series ADSL Router you can add up to 15 more connection profiles, for a total of 16,
although you can only use one at a time.
although you can only use one at a time.
ADSL Line Configuration
Data Link Encapsulation... RFC1483
TO MAIN MENU NEXT SCREEN
Enter Information supplied to you by your telephone company.