Mitsubishi wd-52628 Manual Do Utilizador

ANT-1 MAIN and ANT-2 AUX can each receive both 

digital and analog over-the-air channels from a VHF/UHF 
antenna or non-scrambled digital/analog cable source.

Your primary viewing signal source should be connected 

to ANT-1 MAIN.  ANT-1 MAIN must be used to view 
premium subscription cable TV service authorized by the 
CableCARD™ access card.  The CableCARD access card 
is provided by your local cable company.  ANT-2 AUX can  
receive over-the-air or non-scrambled cable signals.

IR Emitters connected to these jacks are used by the 
NetCommand system of the TV to control external analog 
devices such as cable boxes, VCRs, DVDs, satellite 
receivers and audio receivers.  This system is also 
coordinated with the TV Guide On Screen® system for 
the control of cable boxes and to activate the record 
feature of your VCR.  Either connection can be used for 
NetCommand functions.

Inputs 1 and 2 can be used for the connection of a VCR, 
Super VHS (S-VHS) VCR, DVD player, standard satellite 
receiver or other A/V device to the TV.  Please note that 
if S-VIDEO and VIDEO are available for the input,  you 

must choose to connect only one.  They cannot both be 

connected at the same time.

These inputs can be used for the connection of devices with 

component video outputs, such as a DVD player, external 
HDTV receiver, or compatible video game system.  Please 
see Appendix A for signal compatibility.

Unlike HDMI, DVI does not carry audio information on the 
same cable.  Use these analog stereo audio inputs when 
using the HDMI input with a device that outputs DVI instead 
of HDMI, such as DVI output from a personal computer.

AUDIO OUTPUT sends analog audio of the program 

currently shown on the screen to an A/V surround sound 

receiver or stereo system.  Digital audio from digital 

channels, FireWire® (DTV Link/IEEE 1394) devices and 
HDMI devices is converted to analog audio by the TV.  If 
you do not have a digital A/V receiver, this should be the 
only audio connection between the TV and your analog 

A/V receiver or stereo system.

RECORD OUTPUT sends analog audio and video to 
a VCR for recording purposes.  These signals may not 
be the same as those of the program that is currently 

COMPONENT

YPbPr (480i/480p/720p/1080i)

INPUT

1

2

S-VIDEO

VIDEO

AUDIO-

LEFT/

(MONO)

AUDIO-

RIGHT

DTV/CABLE/

VHF/UHF

ANT 1 / MAIN

ANT 2 / AUX

DIGITAL

AUDIO

OUTPUT

CableCARD™ 

USE WITH

 ANT 1  CARD TOP

1

2

Y

Pb

Pr

AUDIO-

LEFT/

(MONO)

AUDIO-

RIGHT

OUTPUT

AUDIO

OUTPUT

RECORD

OUTPUT

DVI

Analog Audio

1

2

VIDEO

AUDIO-

LEFT/

(MONO)

AUDIO-

RIGHT

MONITORLINK™/HDMI

VIDEO 480i/480p/720p/1080i

AUDIO PCM LINEAR

1

2

IEEE 1394 

INPUT/

OUTPUT

Net Command

IR EMITTER

¸

' ,INK

¸

INPUT

PC - 60Hz

VGA, W-VGA,

SVGA, W-SVGA,

XGA, 1280 X 720