Mitsubishi wd-52628 Manual Do Utilizador

The V-Chip Lock menu gives you access to three different 
types of TV locks.  You must use a pass code to open 
this menu to enable/disable the lock options.  The three 
different types of locks available are:

• 

V-Chip
Lets you restrict access to programming based on 
program-rating signals sent by the broadcaster.  You 
can also set the time of day for these restrictions to 
be in effect.

• 

Lock by Time
Lets you restrict all TV viewing by time of day.

• 

Front Button Lock
Lets you disable the controls on the front of the TV.  
Use this option if there are small children near the 
TV who may be tempted to press the front-panel 
buttons.

You are prompted to enter a pass code whenever you 
select V-Chip Lock on the menu or press the V-CHIP key 
on the remote control.  To set a pass code for the first 
time:

1.  Do one of the following:

•  Press V-CHIP on the remote control.
•  Press TV MENU, highlight V-Chip Lock, then 

press ENTER.

A screen prompting you for a pass code displays.

2.  Input a four-digit pass code using the number keys 

on the remote control.

•  Press CANCEL to delete a number and move 

back one space.

•  Press MENU or HOME to exit without setting 

a pass code.

3.  Press ENTER to confirm the pass code just input.
To reset the pass code, see the procedure in Appendix C.

The V-Chip menu allows you to:
•  Turn the V-Chip Lock on or off
•  Change the permitted V-Chip rating level
•  Set the time of day to enforce rating restrictions

The TV comes from the factory with pre-set V-Chip 
ratings and with the V-Chip Lock turned off.  The preset 
ratings are TV-PG (TV rating) and PG (movie rating).  If 
you turn on the V-Chip, these presets will allow only 
programs rated TV-PG/PG or lower.  You can turn on 
V-Chip from this menu or by using the V-CHIP button on 
the remote control.  Use the V-Chip menu to change the 
permitted rating levels.

After changing channels or devices, there may be a delay 
of up to five seconds before the V-Chip lock takes effect.

1.  Highlight the V-Chip icon 

 on the V-Chip Lock 

menu (figure 20) and press ENTER to open the V-
Chip menu (figure 21).

2.  Press ADJUST   or   to select On or Off.
3.  If you selected On, press ADJUST   to move to the 

TV Rating box.

4.  Press ADJUST   or   to select the TV rating level 

you want to allow.

5.  Press ADJUST   to move to the TV content 

categories.
•  Press ADJUST   or   to move between 

categories.

•  Press ENTER to add check marks to the TV 

content categories you want to block.