Quantum govault 40gb Guia Do Utilizador

Chapter 2  Installation Procedures

Installing the External GoVault Tabletop Dock

GoVault™ for Windows User’s Guide

15

Installing the External GoVault Tabletop Dock

Install the external GoVault Tabletop dock and cartridge as follows:

Connect the drive-end (Mini-B) connector of the USB interface cable 

to the Mini-B USB port on the rear panel of the GoVault Tabletop 

dock (see 

).

Connect the DC power output plug of the power adapter/converter 

to the DC power jack on the rear panel of the dock.

Carefully position the dock in a secure location that provides 

adequate circulation for the rear panel air vents (see 

Plug the power adapter/converter into a 115/230 VAC facility power 

receptacle  and verify that the LED on the front panel of the GoVault 

Tabletop dock illuminates. 

Figure 10  GoVault Tabletop 
Rear Panel

Connect the system-end (standard) connector of the USB interface 

cable to an available USB port on your workstation or server system 

and verify that the system launches the 

wizard 

that finds and configures the device driver, assigns a drive letter, and 

enables read/write access.

Use Windows 

 to verify successful GoVault Tabletop 

configuration (see 

Air vents

Mini-B USB port

DC power jack