Quantum govault 40gb Guia Do Utilizador

Chapter 3  Operation

Updating the GoVault Firmware

GoVault™ for Windows User’s Guide

47

Updating the GoVault Firmware 

Check and update the firmware on the GoVault dock as follows:

Use the procedure in 

 to view the GoVault 

 display (see 

Note the 

 level shown for the GoVault dock in the 

 

column on the 

 display.

To determine the most-recent revision level of the GoVault firmware, 

use your Internet connection to open the Quantum web page at:

Compare the most-recent revision of the GoVault firmware on the 

Quantum website with the version that is installed on your dock:

If they are the same, then there is no need to proceed with the 

firmware update procedure.

If the firmware on the Quantum website is a later version than 

the firmware installed on your dock, then download the newer 

firmware file, saving it to a location on your local system startup 

hard drive. This is usually drive C.

Insert a write-enabled cartridge into the GoVault dock.

Click 

on the 

 display to view the 

 dialog (see 

).

Click 

 and navigate to the new firmware file 

you downloaded and saved in step 4-b of this procedure.

With the new firmware file displayed in the 

 

field, click 

.

As prompted by the 

 message 

), close all open applications that might try to 

communicate with the GoVault drive, including:
• Any third-party backup software
• Windows 

•