Quantum SuperLoader 3 Manual Suplementar

Quantum SuperLoader3 Magazine and Magazine Blank Removal/Replacement Instructions
Document 81-81314-01 B01
October 2005

4

Replacing a Magazine or Magazine Blank

0

On the front panel menu, scroll to 

.

Press 

 on the front panel.

On the 

 submenu, scroll to 

, and then press 

 on the 

front panel.

On the 

 submenu, scroll to 

 or 

, 

depending on which magazine you want to eject, and then press 

 on 

the front panel.
The magazine pops forward so that the front of the magazine is no longer 

flush with the front panel.

With one hand, grasp the magazine by the handle and slide it forward to 

remove. Place your other hand under the magazine to support it and 

prevent it from falling.

0

Your autoloader comes equipped with either two magazines, or one 

magazine and one magazine blank. The autoloader will not function without 

both magazine bays equipped with either a magazine or a magazine blank.
To remove a magazine blank:

Pull the magazine blank straight out.

Replace with another magazine blank or a cartridge magazine (see 

0

To install a cartridge magazine:

Grasp the magazine by the handle with one hand and support it 

underneath with the other hand.

Slide the magazine into the magazine bay. Make sure you position the 

magazine correctly; it should slide smoothly.

The magazine is correctly installed when you feel it click into place and 

the front is flush with the front panel.

0

To install a magazine blank:

Grasp the magazine blank by the handle with one hand and guide the 

blank into the magazine bay.

Insert the magazine slowly to avoid damaging internal 

components or the autoloader.