Quantum SuperLoader 3 Guia De Configuração Rápida

Windows Operating System Support

• Ensure the autoloader is properly terminated. If the autoloader is the only SCSI 

device other than the SCSI host adapter on the selected SCSI bus, it must be 

terminated. Likewise, if the autoloader is physically the last SCSI device on the 

SCSI bus, it must be terminated. Only the devices physically at the beginning and 

end of the SCSI bus should be terminated. If the host is located at the beginning of 

the SCSI bus, the host should already have a terminator installed.

• Verify the connection between the autoloader and host by going to 

 and/or 

 in Microsoft

®

 Windows

®

 2000, Microsoft Windows XP and Windows 

Server

®

 2003. For more information on verifying the connection of SCSI devices, 

consult the operating system documentation.

Windows Operating System Support

There are two device drivers associated with the SuperLoader 3 autoloader. One for the 

autoloader itself, and a second for the tape drive within the autoloader.

0

For the SuperLoader 3 device driver, go to:
•  

0

For the tape drive (within the autoloader) device driver, go to one of the following:
• For the LTO-2 drive, go to:

 

.

• For the LTO-3 drive, go to:

 

.

• For the HP LTO-4 SCSI drive, go to:

Software and Driver Downloads at the HP Web site.

Device drivers are required if you intend to use the Microsoft Windows native 

backup application. Commercial backup applications provide all necessary 

device driver support. 

www.quantum.com

 for a list of compatible backup applications. 

Please note that Microsoft Windows NT

®

 does not include native support for 

autoloaders. A backup application must be used if using the SuperLoader 3 

under Microsoft Windows NT.