Qstarz bt-q818 extreme Instrução De Instalação
Next Generation GPS Super 51-CH GPS Receiver BT-Q818 eXtreme Quick Guide
3
E-4 Activate G-Mouse function via USB connection
1. Install the USB Driver (Only support Microsoft Windows XP / Vista)
Insert the Driver CD, and find the folder “USBDriver\Windows_2K_XP_S2K3_Vista”.
Double click “CP210xVPInstaller.exe” to install the USB driver.
2. Connect BT-Q818eXtreme with your PC
Connect BT-Q818eXtreme with your PC by mini-USB cable and switch
BT-Q818eXtreme to <USB> position.
3. Check the COM port no. your PC is assigned for BT-Q818eXtreme
Go to <Start> \ <Settings> \ <Panel Control> \ <Performance and Maintenance> \
<System> and Select <Hardware> tab and then click <Device Manager>. Expand the
<Ports (COM & LPT)> and check “CP210x USB to UART Bridge Controller” to see
which COM port is for BT-Q818eXtreme.
E-5 Set correct Serial Port in your map software
Activate your navigation software and make sure to select the correct “Serial Port”.
Activate your navigation software and make sure to select the correct “Serial Port”.
NOTE 1: In the map software such as TomTom, you might need to change
preference and set “Other Bluetooth GPS” according to PDA/phone model. In
some case please consult map software company to vary the setting if you have
issue on positioning.
preference and set “Other Bluetooth GPS” according to PDA/phone model. In
some case please consult map software company to vary the setting if you have
issue on positioning.
NOTE 2: There might be specific setting requirement per navigation software.
Such as Tomtom, please delete other GPS settings under Tomtom software, and
keep one only.
Such as Tomtom, please delete other GPS settings under Tomtom software, and
keep one only.
E-6 Switch off the Bluetooth function
Switch off GPS function in your PDA/Smart phone/PC, then the Bluetooth connection
will be disconnected automatically. Then put BT-Q818eXtreme power switch to “OFF”
position.
Switch off GPS function in your PDA/Smart phone/PC, then the Bluetooth connection
will be disconnected automatically. Then put BT-Q818eXtreme power switch to “OFF”
position.
F. Function of Auto On-Off (Power saving mode)
BT-Q818eXtreme supports Auto On-Off (Power saving mode). It can automatically
enter sleeping mode after the Bluetooth connectivity is turned off, so the Blue LED will
turn to flash every 5 seconds. Thus you can always power it on with very low power
consumption.
enter sleeping mode after the Bluetooth connectivity is turned off, so the Blue LED will
turn to flash every 5 seconds. Thus you can always power it on with very low power
consumption.
Under power saving mode, when detecting Bluetooth is being connected,
BT-Q818eXtreme will auto wake up itself and the blue LED will turn to flash every 1
second and GPS Orange LED will be also On.
BT-Q818eXtreme will auto wake up itself and the blue LED will turn to flash every 1
second and GPS Orange LED will be also On.
Note: Power saving mode would not function under G-Mouse mode.
English