Sony str-da4600es Guia Do Utilizador

To avoid damaging your
speakers

Before you turn off the receiver, be sure to turn
down the volume level.

You can enter a name of up to 8 characters for
inputs and display it.
This is convenient for labeling the jacks with
the names of the connected components.

Select the input you want to
name on the “

Input” screen.

Press OPTIONS.

The option menu appears.

Select “Name Input,” then press

Press

V/v to select a character,

then press

You can shift input position backward and
forward by pressing

B/b.

Repeat steps 4 to input a
character one by one, then
press .

The name you entered is registered.

Enjoying sound/images
from the components
connected to the DIGITAL
MEDIA PORT

The DIGITAL MEDIA PORT is for enjoying
sound/images from a portable audio source or
computer by connecting a DIGITAL MEDIA
PORT adapter.
Available DIGITAL MEDIA PORT adapters
vary in each area.
For details on connecting the DIGITAL
MEDIA PORT adapter, see “Connecting
components with digital audio input/output
jacks” (page 34).

You can use the following Sony DIGITAL
MEDIA PORT adapters:
• TDM-BT1/BT10 Bluetooth™ Wireless

Audio Adapter

• TDM-NW10 DIGITAL MEDIA PORT

Adapter

• TDM-iP10/iP50 DIGITAL MEDIA PORT

Adapter

• TDM-MP10 DIGITAL MEDIA PORT

Adapter

The DIGITAL MEDIA PORT adapter is an
optional product.

Notes

• Do not connect an adapter other than the DIGITAL

MEDIA PORT adapter.

• Before disconnecting the DIGITAL MEDIA PORT

adapter, make sure to turn the receiver off using the
remote.

• Do not connect or disconnect the DIGITAL

MEDIA PORT adapter to/from the receiver while
the system is turned on.

• Depending on the type of DIGITAL MEDIA

PORT adapter, the images are also output.

• Do not connect to the receiver a DIGITAL MEDIA

PORT adapter that uses a network function such as
TDM-NC1 Wireless Network Audio Client.
You can use the network function of the receiver
without using a DIGITAL MEDIA PORT adapter.

Naming the input (Name Input)