Sony STR-DA5300ES Guia De Utilização

113

the
r O

erati

ons

Using a bi-amplifier
connection

If you are not using surround back speakers,
you can use the SURROUND BACK
SPEAKERS terminals for the front speakers
for use with a bi-amplifier connection.

To connect speakers

Connect the jacks on the Lo (or Hi) side of the
front speakers to the FRONT SPEAKERS A
jacks, and connect the jacks on the Hi (or Lo)
side of the front speakers to the SURROUND
BACK SPEAKERS terminals. Make sure that
metal fittings of Hi/Lo attached to the speakers
have been removed from the speakers. Not
doing so may cause a malfunction of the
receiver.

To set up speakers

Set “Sur Back Assign” to “BI-AMP” in the
Speaker settings menu. The same signals
output from the FRONT SPEAKERS A jacks
can be output from the SURROUND BACK
SPEAKERS terminals by setting “Sur Back
Assign” to “BI-AMP.”

Notes

• You cannot use the FRONT SPEAKERS B jacks

for a bi-amplifier connection.

• When you use the auto calibration function, make

the bi-amplifier settings before you perform auto
calibration.

• If you make the bi-amplifier settings, the speaker

level, balance, and equalizer settings of the
surround back speakers become invalid, and those
of the front speakers are used.

• Signals output from the PRE OUT jacks are used

with the same settings as those of the SPEAKERS
terminals.

Front speaker

(R)

Front speaker

(L)