Sony STR-DA7100ES Guia De Utilização

Página de 139
100
GB
E:\STR-DA7100ES\2320745143\2320745143STRDA7100ESUC\01GB-
STRDA7100ESUC\060SUR.fm
masterpage: Left
STR-DA7100ES
2-320-745-14 (3)
SURROUND L 
xxx
.
x
 dB 
(Surround speaker (L) level)
Initial setting: 0 dB
You can adjust the level from –20 dB to +10 
dB in 0.5 dB steps.
SURROUND R 
xxx
.
x
 dB 
(Surround speaker (R) level)
Initial setting: 0 dB
You can adjust the level from –20 dB to +10 
dB in 0.5 dB steps.
SURR BACK 
xxx
.
x
 dB 
(Surround back speaker level)*
Initial setting: 0 dB
You can adjust the level from –20 dB to +10 
dB in 0.5 dB steps.
SURR BACK L 
xxx
.
x
 dB 
(Surround back (L) level)**
Initial setting: 0 dB
You can adjust the level from –20 dB to +10 
dB in 0.5 dB steps.
SURR BACK R 
xxx
.
x
 dB 
(Surround back (R) level)**
Initial setting: 0 dB
You can adjust the level from –20 dB to +10 
dB in 0.5 dB steps.
SUB WOOFER 
xxx
.
x
 dB
Initial setting: 0 dB
You can adjust the level from –20 dB to +10 
dB in 0.5 dB steps.
MULTI CH SW 
xxx
 dB (Multi 
channel sub woofer level)
Initial setting: 0 dB
Lets you increase the level of the MULTI 
CHANNEL INPUT sub woofer channel by 
+10 dB. This adjustment may be necessary 
when connecting a DVD player to the MULTI
CHANNEL INPUT jacks. The sub woofer 
level from DVD players is 10 dB lower than 
that of Super Audio CD players.
*
Only when the surround back speakers are set to 
“SINGLE” on the SPEAKER SET UP menu (page 
49).
**
Only when the surround back speakers are set to 
“DUAL” on the SPEAKER SET UP menu (page 
49).
Note
When one of the following sound fields is selected, 
no sound is output from the sub woofer if all the 
speakers are set to “LARGE” on the SPEAKER SET 
UP menu. However, the sound will be output from 
the sub woofer if the digital input signal contains 
L.F.E. signals, or if the front or surround speakers 
are set to “SMALL.”
• D.CONCERT HALL A
• D.CONCERT HALL B
• CHURCH
• JAZZ CLUB
• LIVE CONCERT
• STADIUM
• SPORTS
Advanced LEVEL menu 
parameters
Use the CUSTOMIZE menu and set “MENU 
EXPAND” to “ON” to enable display and 
setup as follows. The initial setting is marked 
with an underscore.
PHASE AUDIO (Phase audio)
• ON
Lets you output front 2 channel source sound 
(instead of the test tone) sequentially from 
adjacent speakers.
• OFF
Note
The HDMI sound is not output when you display the 
receiver’s menu on the TV monitor.
PHASE NOISE (Phase noise)
• ON
Lets you output the test tone sequentially from 
adjacent speakers.
• OFF