Sony STR-DE185 Manual

• Point the remote at the remote sensor 

g

 on the

receiver.

• Remove any obstacles in the path between the

remote and the receiver.

• Replace both batteries in the remote with new

ones, if they are weak.

• Make sure you select the correct function on the

remote.

• If the remote is set to operate the TV only, use

the remote to select a source or component other
than TV before operating the receiver or other
component.

All memorized settings

page  11

With 8 ohm loads, both channels driven, from
40 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09 % total harmonic distortion from 250
milliwatts to rated output (Models of area code
U only).

POWER OUTPUT
Models of area code U
Rated Power Output at Stereo Mode
(8 ohms 40 Hz – 20 kHz, THD 0.09 %)

100 W + 100 W

Models of area code CEL, CEK
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)

100 W + 100 W

1)

1) Measured under the following conditions:

CEL, CEK

230 V AC, 50 Hz

CD, MD/TAPE,
VIDEO 1, VIDEO 2

CD, MD/TAPE,
VIDEO 1, VIDEO 2

2) INPUT SHORT.
3) Weighted network, input level.

MD/TAPE, VIDEO 1

+8 dB at 70 Hz

±10 dB at 100 Hz and
10 kHz

Voltage: 250 mV
Impedance: 10 kilohms

20 Hz – 50 kHz
+0/–0.5 dB (with bass
boost bypassed)

Sensitivity: 250 mV
Impedance: 50 kilohms
S/N

2)

: 85 dB

(A, 250 mV

3)

)