Sony DCR-HC1000 Guia Do Utilizador
Recording
38
4
Touch the desired effect, then touch
.
When you touch [OVERLAP], [WIPE] or
[DOT FADER], the image on the tape in
your camcorder is stored as a still image.
(While storing the image, the screen turns to
blue.)
[DOT FADER], the image on the tape in
your camcorder is stored as a still image.
(While storing the image, the screen turns to
blue.)
5
Press REC START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
disappears when the fade is complete.
To cancel the operation
Follow steps 2 and 3, then select [OFF] in step 4.
b
Note
• You cannot use the FADER function together with:
– Self-timer
– Digital effect
– [FRAME REC] (Frame recording)
– [INTERVAL REC] (Interval recording)
– Shutter speed 1/30 second or slower
– Digital effect
– [FRAME REC] (Frame recording)
– [INTERVAL REC] (Interval recording)
– Shutter speed 1/30 second or slower
Fading in from still image on the
“Memory Stick Duo” – Memory overlap
“Memory Stick Duo” – Memory overlap
You can fade in from the still image on the
“Memory Stick Duo” to the movie currently
being recorded on the tape.
“Memory Stick Duo” to the movie currently
being recorded on the tape.
1
Check that you have a “Memory Stick
Duo” with the still image to be
superimposed and a tape in your
camcorder.
Duo” with the still image to be
superimposed and a tape in your
camcorder.
2
Slide the POWER switch to select the
CAMERA-TAPE mode.
CAMERA-TAPE mode.
3
Touch .
4
Touch
[
MENU].
5
Select
(PICT. APPLI.), then
[
OVERLAP] by touching
/
and
.
The recorded image appears on the
thumbnail screen.
thumbnail screen.
6
Touch
(previous)/
(next) to
select the still image to be superimposed.
7
Touch [ON], then
.
8
Touch .
9
Press REC START/STOP to start
recording.
[M. OVRLAP] stops flashing, and
disappears when fading is finished.
recording.
[M. OVRLAP] stops flashing, and
disappears when fading is finished.
b
Note
• If you set the shutter speed to 1/30 second or slower,
you cannot use the memory overlap.
Using special effects
– Digital
effect
You can add digital effects to the recordings.
[STILL]
You can record a movie while superimposing it
on a previously recorded still image.
on a previously recorded still image.
[FLASH] (flash motion)
You can record a movie with a serial-still-image
effect (strobe effect).
effect (strobe effect).
[LUMI. KEY] (luminance key)
You can replace a brighter area in a previously
recorded still image, such as the background of
a person or a title written on white paper, with a
movie.
recorded still image, such as the background of
a person or a title written on white paper, with a
movie.
0:00:00
STBY
P-MENU
60min
FADER
MOSAIC
Still image
Movie