Sony DCR-PC350 Guia Do Utilizador

Página de 152
Recording
32
3
Slide the POWER switch repeatedly 
until the CAMERA-MEMORY lamp 
lights up.
The selected recording folder is displayed.
4
Press and hold PHOTO lightly.
You will hear a light beeping sound when 
the focus and brightness settings are 
adjusted. Recording does not start at this 
point.
* The number of images that can be recorded 
varies depending on the image quality setting 
and the recording environment.
5
Press PHOTO fully.
A shutter sound is heard. When bars of 
 disappear, the image is recorded on 
the “Memory Stick Duo.”
To check the most recently recorded 
image – Review
Touch .
Touch 
 to return to standby.
To delete the image, touch 
, then [YES].
To cancel deleting, touch [NO].
To turn the power off
Slide the POWER switch up to the OFF (CHG) 
position.
To record still images continuously – Burst
Select the 
 (MEMORY SET) menu, 
[STILL SET], then [
You can record 3 to 32 images continuously in 
a time interval of about 0.5 to 0.07 seconds.
Indicators displayed during recording
Recording folder
Image size
 (2016 × 1512), 
 (1600 × 1200) 
or 
 (640 × 480)
Quality
 ([FINE]) or 
 ([STANDARD])
Personal Menu button (p. 63)
Review button (p. 32)
z
Tip
• When you press PHOTO on your Remote 
Commander, the image displayed on the screen at 
that timing is recorded.
• The recording time, date, and the camera settings 
data are recorded automatically on the recording 
media without being displayed on the screen. You 
can view this information during playback by 
selecting [DATA CODE] on the screen (p. 58)
• The recording angle is wider than that of the 
CAMERA-TAPE mode.
Slide the POWER 
switch while pressing 
the green button.
30
P-MENU
60min
FINE
2016
101
The indicator 
stops flashing.
The number of images 
that can be recorded.
*
P-MENU
60min
FINE
2016
101