Allworx 9102 Guia Do Utilizador
Phone Guide – 9102 / 9112
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2007Allworx Corp. All rights reserved. Allworx is a registered trademark of Allworx Corporation. All other names may be trademarks or registered
trademarks of their respective owners.
Revised: October 10, 2007
Page 9
a. Use the Up / Down navigation arrows, to select the Call Appearance PFK of the person you
wish to put on hold and then press the Hold button. (The display will show the two parties
involved in the conference).
involved in the conference).
b. You may now talk to the remaining party.
c. The Call Appearance PFK for the person on hold will be flashing. To have the person re-join the
conference, press Conference, then select the flashing Call Appearance PFK. The three-way
conference is then re-established.
conference is then re-established.
4.4 Intercom
1. Press
the
Intercom button, and then dial the extension of the person you would like to talk to.
2. The call is connected when the LCD screen displays Active Call.
3. Start talking. The person you called will hear you over the speaker.
4. To deny an incoming Intercom request, press the Ignore soft key.
5. Press
the
Intercom or Speaker button to end the call.
4.5 Release
The Release button is used to hang-up an active call or to abort a new call setup, such as the middle of a
transfer operation.
transfer operation.
4.6 Info
The Info button is only available on the Allworx 9112 phone. The button is used to get information regarding
the other buttons on your phone. For example, you can use the Info button to determine the numbers that have
been programmed for each speed-dial button.
the other buttons on your phone. For example, you can use the Info button to determine the numbers that have
been programmed for each speed-dial button.
To use this feature:
1. Press
the
Info button.
2. Press any of the other buttons on the phone.
3. A screen will be displayed with a brief description of the selected button.
4. Press
the
Info button a second time or let the screen time-out to exit the description screen.
4.7 Speaker
Press the Speaker button for hands-free use of the phone.
If you’re already using the handset, you can:
• Press the Speaker button, then place the handset on the hook. Take the handset off the hook to
continue using it again. When you are finished with the call, press the Speaker button to hang up.